Dear Sir
subject to prior sale we can offer
1.) 1x used Asphalt Mixing Plant “Ammann“ 55 To./h
Y.o.C.:
1965 / new built-on 1985 / 2007
Output:
55 t/h – 4%
Drying Drum: Ammann T 1660
Mixing Tower: Ammann
Mixer:
Ammann Eddy Mixer 750 kg./Charge
Screening:
3 Fraction + 1 Bypass, new screen 2006
Predosing:
7 Pcs. à 7,5 m³, abrasive laminations rev. 2007
Filter:
Lühr 18'000 Nm/3, new Filter Hoses 2007
Burner:
Oertli AR 35, light Oil Burner
LoadingSilos 66T t: 4 x 16.5 t, = Total 66 t
Filler
Silos:
2 x reclaimed filler 30 t + 20 t, 1 x imported filler 50 t
Bitumen tanks: 3 Pcs. à 30’000 Ltr. thermaloil heated
Oil
tanks:
1 Pcs. à 20'000 Ltr.
Control
Unit:
Stoll-Ammann, in container installed
Bridge balances: 1 à 44 t / 12 m x 3,4 m, measuring system new 2007
Condition:
Very good durable plant will be in function till end of march 2008
Already dismantled.
Price: € 198.000,-- EXW Europe incl. Dismantling
===========================================================================
2.) 165 TPH Cement Mil
Brandnew 165 TPH Cement Mill, Both Side Slide Shoe Design with Centre Drive,
Size UMS-4.6m? x 16.0m long (4600mm x 16000mm), Capacity 165 TPH (OPC @3000 Blaine)
with AIA Megatox Liners, Main Drive Motor, Gear Box, Auxiliaries etc. as under:
- - 5000 KW 960 RPM 11 KV BHEL Motor (1 No)
- - MAAG (SWISS) Planetary Gear Box CPU 38/S Output 15.33 RPM (1 No.)
- - O – SEPA Seperator with Gear Box.
- - Recirculation Fan with 600 KW 1000 RPM 6.6 KV BHEL Motors.
- - Clinker Feeding Weigh Feeder with 3.7 KW Motor (2 Nos.)
- - Gypsum Feeding Weigh Feeder with 2.2 KW Motor (1 No.)
- - Mill Outlet Air Slide with 2.2 KW Motor
- - Elevator Discharge to Seperator Air Slide with 7.5 KW Motor
- - Seperator Feeding Air Slide
- - Recirculation Fan
- - Seperator Venting Bag Filter
- - Seperator Bag Filter Fan with 75 KW Motor
- - Seperator Reject Air Slide with 3.7 KW Motor
- - Mill Vent Bag Filter
- - Filter Dust Transport Air Slide with 2.2 KW Motor
- - Mill Vent Fan with 75 KW Motor
- - Cement Transport Air Slide with 3.7 KW Motor
- - Cement Transport Air Slide with 2.2 KW Motor
- - Cement Transport Air Slide with 5.5 KW Motor
Delivery – Immediate
Price is USD 4.9 Million (USD Four Million and Nine Hundred Thousand Only)
each complete Mill as per Scope of Supply FOB Indian Port.
The 2x165 TPH Cement Mills and Auxiliaries offered to you are BRANDNEW and never installed and never commissioned.
The Equipment was ordered in 2007 and delivery received in late 2008 and since then the Equipment is stored in a
Warehouse as per Guidance of Manufacturers and very well preserved.
Please further note that the Owners have placed order for 4 (Four) such Units & Out of which 2 (Two) are under installation
but 2 (Two) have become surplus due to change in Plans and non availability of required Quality of Raw Material at Site.
The Normal delivery of such Equipment is 22/24 months after placement of order.
===========================================================================
3.) several Cement Mixing and Tank Trucks on request
===========================================================================
4.) MTU GENSETS:
MTU 60Hz/480V
2930 KVA STANDBY 16V4000G83
· Standard Scope of Supply
· Open skid type
· ABB 3P Breaker
· V500 control
· Battery Float Charger
· Lead Acid Battery
· Flex. Bellow (Loose)
· Industrial Type Silencer (Loose)
· Standard Export Packing
Price 412,250 Euro
===========================================================================
5.) MTU 18V2000G63 1140KVA (50HZ)
1294KVA (60HZ)
** 8 UNITS AVAILABLE WITH FAST DELIVERY
please find below the mtu dual frequency (18v2000g63) sets:
for 50hz, 400v
prime: 828kw/1035kva
standby: 912kw/1140kva
for 60hz, 480v
prime 940kw/1175kva
standby: 1035kw/1294kva
Open set model exw: 153,950.00 USD each
(standard v500 comap with breaker);
(v500g comap autosync c/w motorized breaker).
open series standard scope of supply
mtu diesel engine
stamford/leroy somer /avk generator
set mounted radiator piping kit and fanguard
mild steel base with set mounted anti vibration isolators
abb 3p fixed type accb or mcb
flexible bellow and industrial type silencer
parts book and o&m manual
ppu (packaged power unit)
additional scope of supply
20/40 ft reinforced container (see attachment)
built in box type silencer
wall lining and intake /discharge silencer
built in fuel tank
piping and fittings
complete synchronization control system
motorized breaker.
Containerised model exw: 185,500.00 USD each
if all 8 units purchased as package: 144,500.00 USD each
===========================================================================
6.) Injection Moulding Machine
Manufacturer: KRAUSS MAFFEI
Type: KM 1600-3500 DP MC
Production hours: 801 hrs
Operating hours, total 3,018 hrs
Built in: 1999
Price, new €1,000,000.00
Price: bid invited
Reduced Price: 189.000,-- € “as it is” EX Germany already dismantled.
DIFFERENT BLOW MOULDING MACHINES ON REQUEST
===========================================================================
7.) Complete second-hand hospital equipment 80 beds
in negotiation - please ask for availibility
The hospital offered below was in operation until 30.08.1999, i.e.,
all devices and items of equipment are neither too old to be used or
defective but are maintained to mandatory German rules and inspected
(regular TÜV inspections, etc.).
The hospital contains the following departments with equipment to common German standard:
Surgery with 2 operation theaters
• Internal department with endoscopy
• Urology
• Gynecology and maternity ward
• Infant ward
• X-ray department
• Ultrasonic department
• In-patient ward with 80 beds
• Emergency power supply (complete)
Meriting a particular mention is the following equipment :
• Operation theater 1
• Gaseous anesthetic monitor
• Blood pressure monitor
• Defibrillator
• Surgical table
• Large surgical lamp
• HF surgery
• Cold light source
• X-ray image viewer
• Long-term ECG unit with connected PC
• Calibrated medical scales
• Electrical seat scale
Emergency power generator:
175 KVA, MAN diesel engine type D 2156 MIT, 204 Pse, 1,500 rpm, built in 1976, recent technical inspection.
SIEMENS generating set, type IFC 4316, 400 V, 260 A, 180 KVA at 1,500 rpm, data relate to site 280 m above sea level.
Additional:
Blood emptying device
Plastic film welding unit
stretcher, suitable for X-ray
Delivery bed
several X-ray cassettes
Automatic disinfection unit for
gastroscopy
several beds
Surgical boots
Surgical clothing
Surgical linen
several infusion pumps
several anaesthetic systems with
aspirator
indirect lighting above beds
REDUCED PRICE: € 185.000,-- „as it is“ EXW Germany
Extra for TÜV provement € 30.000,--
Equipment list and photos on request
===========================================================================
8.) 20" OD ERW Pipe Mill
TThis mill was newly built in 2008, never used, a new mill!
Round Pipe:
Pipe
OD:
180 mm to 508 mm
Pipe Wall Thickness: Max. 12.7 mm
Pipe Lengths: 6 m to 18 m
Square Pipe:
Sizes:
150 mm x 150 mm x 4 mm to 400 mm x 400 mm x 12.7 mm
Pipe Wall Thickness: 4 mm to 12.7 mm
Pipe Lengths: 6 m to 18 m
Rectangular Pipe:
Sizes:
200 mm x 100 mm x 4 mm to 500 mm x 300 mm x 12.7 mm
Pipe Wall Thickness: 4 mm to 12.7 mm
Pipe Lengths: 6 m to 18 m
Material:
Slit-to-width cold or hot rolled steel coils
Coil Size:
Strip Widths: 600 mm to 1600 mm
Width Tolerance: +/-0.5 mm
Strip Thicknesses: 4 mm to 12.7 mm
Coil
O.D.:
1300 mm to 2000 mm
Coil
I.D.:
508 mm, 610 mm and 760 mm
Coil Weight: Max. 30 metric tons
Forming / Welding Speeds: 8 to 30 m/min
Welding Type: H.F. Induction Welding
Welding Power: Solid State 600 kW
Mill
Capacity:
Maximum 120,000 Metric Tons per year
Power Supply for Drive: AC380V, 50Hz
Power Supply for Control: AC220V, 50Hz
Mill Total Power: ~2500 kW
Workshop Area: ~150 m x 18 m
Cranes:
30T (1) and 5T (1)
Equipment List
Coil Preparation Section
1. Coil Carriage
2. Uncoiler
3. Pinch Roll and Leveler
4. Shear Butt-Welder
5. Horizontal Accumulator
6. Hydraulic System
7. Electrical Equipment & Control System
Main Mill (Working Mill) Section
8. Forming Mill
9. Welding Equipment - 600 kW Solid State H.F. Welder (1)
10. Cooling System
11. Sizing Mill
12. Turks Heads
13. Cutoff - Computer-based Flying Saw
14. Run-out Table
15. Pipe Collection Table
16. Roll
17. Electrical Equipment & Control System
Photos and Price are available on request.
THIS NEW MILL CAN BE STARTED UP AT YOU PLANT WITH FACTORY SUPPERVISION.
Please let me know if you have further questions.
Note:
This list is not complete.
Should you miss anything let us know
Best regards
CH Non-Food Import-Export Corporation
British Virgin Islands
Phone: +1 206-201-2420
Fax: +1 206-337-0754
office6@ch-non-food.com
http://www.ch-non-food.com/